ELMEHDI ESSAMIT / EHTP

For recruiters

I am looking for a 1 to 2 month introductory internship in summer 2027, ideally on a real project: engineering studies, operations, maintenance or automation. Morocco or abroad.

Open to applications

Period
Summer 2027
Duration
1 to 2 months
Framework
Internship under an EHTP agreement
Mobility
Morocco or abroad
Fields
Engineering studies, Operations, Maintenance, Automation
Based in
Casablanca, Morocco
Working languages
French, English, Arabic

Elmehdi Essamit / EHTP

A first engineering internship.

I build complete systems, from the ESP32 sensor to the power-flow solver, and validate every result against a reference.

First year at EHTP, after two years of MP preparatory classes. Three public projects on GitHub (power-flow solver, synchrophasors, embedded control), one defended experimental TIPE and two years leading technical workshops.

Verifiable in two minutes

  1. swingbus: power flow and N-1, checked against PYPOWER on every commit
  2. nabd: ESP32-S3 firmware and KiCad board for synchrophasor measurement
  3. ariadne: control and planning in C++, 115 tests in CI
  4. TIPE presentation, 44 slides: setup, measurements and efficiency

Every work page also states what is not yet demonstrated.

What does your team do?

Pick the closest: the related project, what I did on it and a possible subject.

THE PROOF

swingbus

10−13pu

maximum deviation from PYPOWER

AC and DC power flow, N-1 contingencies, DC-OPF.

THE PROOF

nabd

59$

of hardware per measurement node

Frequency, ROCOF, synchrophasors, mains-isolated acquisition.

WHAT I BRING

A SUBJECT FOR YOU

Energy dashboard for a sitePython scripts + dashboard + note

THE PROOF

ariadne

2.4×

faster than stop-and-pivot

Pole placement, motion planning, C++ on FreeRTOS on ESP32.

THE PROOF

Wireless power transfer

23%

reported resonant peak, at 34 kHz

RLC bench, oscilloscope, efficiency, model versus measurement.

WHAT I BRING

A SUBJECT FOR YOU

Reactive power compensationCalculation tool + sizing note

Tools, project by project

Each dot is a project where the tool was actually used. Open the column to check.

Tools used, project by project
ToolZouzouswingbusnabdWireless power transferariadneCascade-GNN
Pythonyesyesyesyes
C++yesyes
ESP32yesyes
Arduino core 3.xyes
ESP-IDFyes
ESP32-S3yes
FreeRTOSyes
Function generatoryes
GPSyes
KiCadyes
MATPOWER casesyes
NumPyyes
Oscilloscopeyes
PyTorchyes
PyTorch Geometricyes
RLC benchyes
SciPyyes
XGBoostyes

Subjects I can run for you

Sized for 1 to 2 months, built on what I have already made, with what I would still need to learn.

SUBJECT A

Energy dashboard for a site

Collect energy meter readings, compute consumption, peaks and power factor, and deliver a clear dashboard for operations.

Deliverable
Python scripts + dashboard + note
I will learn
Modbus protocol, site equipment
Discuss this subject
SUBJECT B

Reactive power compensation

Compute P, Q, S and the power factor of an installation, then size a capacitor bank in a checked calculation note.

Deliverable
Calculation tool + sizing note
I will learn
Standards and the team’s product range
Discuss this subject
SUBJECT C

Automated test bench

Write scripts that automatically test a firmware, a PLC or a communication gateway, with a readable report on every run.

Deliverable
Test suite + report + guide
I will learn
The team’s PLC environment
Discuss this subject
SUBJECT D

Electrical network study of a site

Model a site’s network, compute the load flow and check that it withstands the loss of one feeder.

Deliverable
Model + N-1 cases + summary
I will learn
The team’s calculation software
Discuss this subject

What is already done

Club Electro-Power · firmware v3

Zouzou

  • Firmware v3 for ESP32, with no external library.
  • Solver tested on 3000 simulated mazes.
  • Wi-Fi remote served by the robot itself.
  • Build and user manual, 13 pages.
Evidence and limitations

Open source · v0.1

swingbus

  • Solver published as v0.1 under the MIT licence.
  • Automatic validation against PYPOWER on every commit.
  • IEEE 118 N-1 screening in 8.3 ms.
Evidence and limitations

Pre-release

nabd

  • ESP-IDF firmware: frequency, ROCOF and synchrophasors.
  • Isolated-acquisition KiCad board, ERC/DRC in CI.
  • Python collector and live map.
Evidence and limitations

Completed academic project

Wireless power transfer

  • RLC model established, transmitter / receiver bench assembled and instrumented.
  • Two operating regimes characterized with a function generator and oscilloscope, peaks reported at 7.4% and 23%.
  • Original 44-slide presentation, defended as a TIPE.
Evidence and limitations

Open source · v3.0

ariadne

  • Software version 3.0, in simulation.
  • 115 tests in CI.
  • C++ planner bit-for-bit identical to Python.
Evidence and limitations

Research prototype

Cascade-GNN

  • Public repository: data preparation pipeline, models and configuration.
  • Graph representation of the networks and an XGBoost baseline in place.
  • Written evaluation protocol, with explicit data leakage prevention.
Evidence and limitations

Operational from the first week

Competences backed by a project, a workshop or a readable document. Each line links to its evidence.

All competences and their status

Teams I am aiming for

Possible supervised contributions

These possibilities suit an introductory internship and remain to be defined with the host team. Above all, I want to work on one of the team’s real projects.

Data and calculations

Prepare data, check units and document a simple calculation.

Discuss this possibility
Measurements and tests

Help prepare a measurement session, record settings and organize observations.

Discuss this possibility
Studies and simulations

Reproduce a power-flow, short-circuit or sizing calculation and compare it with the team’s tool.

Discuss this possibility
Automation and embedded

Test a PLC program or firmware, write test scripts, analyse measurement logs.

Discuss this possibility
Technical documentation

Prepare a protocol, summary or presentation material.

Discuss this possibility

IN 60 SECONDS

Elmehdi Essamit

I build complete systems, from the ESP32 sensor to the power-flow solver, and validate every result against a reference.

Profile
Engineering student, year 1 · EHTP
Looking for
Introductory internship · 1 to 2 months
Period
Summer 2027
Mobility
Morocco or abroad
Languages
Arabic · French · English
Download the CVessamit.elmehdi@proton.meLinkedInFull recruiter page

Search the portfolio